Designed for installations with 2-inch mesh.
Pre-shaped to fit around two sides of a diamond but are twisted on the side of the post to reduce risk of injury to passing personnel.
Architects & Engineers
This section is designed to assist Architects & Engineers develop bid specifications for commercial chain link fencing projects they may be working on. L&C Enterprises-USA’s pre-formed fence ties meet ASTM requirements – ASTM Standard Page. If you have questions about your project, call us at 866-786-1009.
Description
Industry standard side tie fits around a post and one fence picket. Ideal for commercial, industrial and military uses.
Specifications:
The ties shall be a preformed steel wire formed in the shape of the post or rail, while fitting tightly over one picket of the fabric. The two ends shall be power twisted with a tool designed to twist the ends three full twists equivalent to one and one half machine turns. The tie shall be positioned on the post or rail with the twisted end protruding in the same direction parallel to the fence preventing risk of injury to passing personal.
Tie wire shall be the same gauge and coating as the fabric used. The tie meets Meets ASTM F567-14 8.4 Power Fastened, Preformed Metallic Coated Steel Round Wire Ties.